From the Sector

Sicomin continues to assert itself as the leading formulator and supplier of high-performance, bio-based epoxy resin systems with the launch of new bioresins at JEC World 2020, Hall 6, Booth 43. The group will unveil a variety of products that are each available in industrial quantities for series production within Automotive, Wind Energy and Civil Engineering.

Bio Fire Retardant Epoxy Gelcoat for Wind Energy and Infrastructure
Sicomin will showcase SGi 128, an innovative intumescent epoxy gelcoat developed specifically for fire retardant coating applications for critical components found in the Wind Energy and Civil Engineering markets.
SGi 128 Gelcoat is produced with 38% of its carbon content derived from non-oil sources and is a halogen free gelcoat that provides outstanding fire protection for epoxy laminates and extremely low smoke toxicity. Available with both fast and slow hardeners, this easy to apply epoxy system forms a much tougher and waterproof part surface than traditional intumescent coatings. Sicomin’s SGi 128 is available in industrial volumes with short lead times and has been successfully tested to EN 13501 (EUROCLASS B-S1-d0) and ASTM E84 (Class A).

NEW Bio Resin for HP-RTM processing for Automotive
Sicomin’s new bio-resin specifically formulated for HP-RTM processing, SR GreenPoxy® 28, is the sixth product in Sicomin’s renowned GreenPoxy® range. SR GreenPoxy® 28 is a fast cycle, low toxicity, third generation bio-based formulation aimed specifically at the HP-RTM moulding processes used for both high performance Automotive structural parts and aesthetic carbon fibre components. The new formulation has been optimized for fast production cycle times and superior mechanical performance and is a more sustainable alternative to traditional resins providing exceptional performance and quality for high volume programmes.

GreenPoxy® InfuGreen 810 on display with the GREENBOATS Flax 27 Daysailer on the JEC Planets
With very low viscosity at room temperature, InfuGreen 810 has been formulated to support manufacturers seeking bio-based alternatives for producing parts using injection or infusion techniques. Produced with 38% plant-based carbon content, InfuGreen 810 holds the DNV GL certification, providing extra assurance of the product’s quality, efficiency and safety standards. This high-performance epoxy infusion system is demonstrated at JEC World through the display of the GREENBOATS Flax 27 daysailer on the JEC Planets.

The Oerlikon Nonwoven experts will be presenting efficient solutions and comprehensive technology know-how for challenging filtration tasks to an international trade audience at the FiltXPO 2020 in Chicago, USA (Stand # 420), taking place between February 26 and 28.

Meltblown technology is one of the most efficient methods for producing very fine and highly-separating filter media made from manmade fibers. New, unique and highly-sophisticated filter media are easy to manufacture thanks to Oerlikon Nonwoven’s optimized meltblown technology. This process is characterized by its constant melt pressure distribution and consistent dwell time across the entire width of the spinning beam, Furthermore, the novel guidance and distribution of the process air outside the coathanger distributor offered by the Oerlikon Nonwoven technology prevents so-called hotspots, which overall ensures particularly homogeneous nonwoven properties and basis weights even in the case of delicate raw materials.

The Oerlikon Nonwoven charging unit stands out against other concepts currently available on the market. Users can freely choose from a large number of variation possibilities and set the optimum charging method depending on the filter application, allowing the Oerlikon Nonwoven charging unit to also be used for the manufacture of EPA- and HEPA-class filter media.

The new forming section ensures improved nonwoven formation evenness across the entire width, even in the case of high spinning speeds, special polymers and polymer combinations. In addition to this, the newly-designed system also ensures that nonwovens only require minimal edge trimming at the end of the production process. The newly-developed mixedfiber technology enables the combining of various filament cross-sections and polymers, in order to set ideal filtering and pleating performances, for example.

• Focus on Productivity and Efficiency

MS Printing Solutions at the next Heimtextil will focus on presenting textile printing solutions to boost cost-effective and high-quality productions, answering to Industry leaders in home and contract textile who need: productivity, quality and beneficial production process.

Attendees will see a JP4 EVO 3200 printer at work, with Bellagio reactive ink made by JK Group. This is one of MS' solutions which streamlines printing processes, reduces production times and maintenance costs, improving efficiency by:

• making the best use of production buildings, minimizing the space occupied by printers: JP4 EVO is compact and functional.
• taking full advantage of manufacturing-process, reducing downtime therefore improving productivity-performances: JP4 EVO can be fed by external roll unwinder ensuring timing optimization.
• using inks with a custom-made waveform, lowering the most common defects due to the interaction between ink and printheads, improving your productivity and competitiveness

The show will be the occasion for the Technical and Sales Teams to illustrate all details which characterize Minilario.  The printing machine, launched at the last ITMA, is the ideal choice for those searching for: flexibility, quality, speed, energy efficiency and sustainability, all in one.

The 64 print heads installed on the innovative printing carriage allow Minilario to reach the shocking but real printing speed of 18m/min, fitting the Home and contract textile demand of productivity and quality, applying a cost-effective production process.

The show will offer the opportunity to remark MS's sustainability commitment, started with #transparentaswater project based on the 100/90/10 paradigm aimed to engage the whole Textile Printing Industry in a big change. The commitment continued with MS’s adhesion to the “Sustainable Technologies” project launched by ACIMIT which selects textile machinery and systems manufacturers whose production specifications ensure a low environmental impact, combining sustainability and innovation. MS' printing machines may boast “Green Label” as “Suppliers of Sustainable Technologies” (come and visit us to go deeply inside our sustainability commitment).

Archroma will be at ChromaTexChem India 2019 to present its latest innovations and solution systems aimed to help textile manufacturers with optimized productivity and/or value creation in their markets. Archroma will also moderate a panel at the exhibition official conference on “Sustainable innovation in textile processing”.

At ChromaTexChem, visitors will be able to discover 24 systems developed along the principles of The Archroma Way to help them create value in their textile applications and markets.

Anjani Prasad, Head of Sales, India, Archroma, comments: “With the growing concerns about resource scarcity and product safety, brands and manufacturers in India work with us, because we continuously develop the innovations and solution systems that help them to address these challenges, increase productivity and create value for them. We do that with in mind the planet and its inhabitants, in line with the objectives of “The Archroma way": Safe, efficient, enhanced. Because it’s our nature!”

DyStar, a leading specialty chemical company with a heritage of more than a century in product development and innovation is pleased to invite you to meet us at DyStar’s Booth H11 of Hall C1, Performance Days at Munich from 13 to 14 November.

Bernhard Knoche, Global Head of Brand & Retailer Management said, “This is our second time at the event, and we are elated to have five of our new developments chosen by the Jury of PERFORMANCE FORUM to be displayed on the Wall Special. Learn and find out how DyStar’s products can help you shape a more sustainable manufacturing journey with us.”

Manufacturers, Brands and Retailers will see intangible benefits from the five winning concepts featured on the Wall Special, namely DyStar CADIRA® Reactive, DYCON® HF on TENOWA® 1, DYCON HF on TENOWA 12, DYCON HF on TEXLENE®, DYCON HF on CERAMICA® GREEN.

DyStar’s Cadira Reactive is a resource saving module which was first launched in 2016. The Cadira concept supports in reduction of water, waste, and energy consumption. And as another sustainable solution offering the DYCON HF series, being the most cost efficient and resource saving continuous process for cellulosics and blends with PES, PA and PU fibres.

The two-day trade fair for the functional fabrics industry highlights a wide range of solutions for Manufacturers, Brands and Retailers globally. At DyStar’s booth, we welcome you to discuss opportunities for collaborations that will help to make the industry cleaner.

In its 19th year, the international textile industry exhibition ShanghaiTex will take place from 25 to 28 November 2019. Saurer Twisting Solutions would be delighted to welcome customers and visitors to Saurer's Stand D40 in Hall E1. The focus is on the highly efficient FusionTwister for staple fibre yarns.

The FusionTwister sets the benchmark for the cost-effective production of two-for-one twisted staple fibre yarns. In order to achieve this, we have taken into account the three main factors affecting our customers’ profitability, namely energy, economics and ergonomics.

The machines’ reliably low energy consumption is an important characteristic for decision-makers to take into account. Achieved by means of an optimised spindle drive as well as a great variety of spindle and feeding sizes for all kinds of applications, it is the main element in the equation of production costs.

Power consumption and costs are closely related, with energy efficiency positively influencing the return on investment, since it is daily challenge to process the maximum feeding weight while keeping electricity usage at a comfortable level.

The machine’s short set-up times, fast air threading and easy handling were key considerations with regard to optimising ergonomics.

At ITMA 2019 in Barcelona from June 20-26th, Goller will introduce the new Knit Merc for achieving the highest quality mercerization of knitted fabrics at the lowest tension and with under 3% variation in dimensional stability with high grade fabrics, for perfect dyeing results every time.

Mercerization is an essential textile finishing step for all cotton and cellulosic fibre-based fabrics in order to improve dye uptake and tear strength while reducing fabric shrinkage and imparting a silk-like lustre to the materials.

The Knit Merc is the result of intensive R&D developments at Goller and follows the successful introduction to the market of the company’s Sintensa Cyclone drum washing compartments for achieving the highest washing efficiency at the lowest tension.

The Knit Merc being exhibited at ITMA 2019 can accommodate 8.4 metres of fabric in its impregnation compartment and a further four metres in its first chain section to achieve a production speed of 25m/min at 30 seconds dipping time.

It is designed for dry-on-wet mercerizing, either cold or hot, and is equipped with an inlet combination of scroll and slat rollers for fabric guidance, a Tandematic uncurler in front of a rubberized de-airing roller and a grooved 320mm bottom roller with 320mm and 600mm perforated upper drums.

It benefits from automatic tension regulation and the low liquor content is ensured by the integrated lye tank and automatic circulation and filtration units.

An 8-ton high efficiency squeezer is stationed at the exit before the chain section and a 5-ton squeezer at the exit of the chain field.

Further fabric control and stability is provided by a cast iron pin chain with automatic optical and mechanical sensors, the Tandematic uncurler, an overfeed device and a driven belt arrangement for fabric support.

Lectra has been awarded by a jury of experts the Texprocess Innovation Award 2019 in the New Process category for its latest ground-breaking offer, Fashion On Demand by Lectra.

Fashion On Demand by Lectra automates the entire personalization process, from order reception and product development to the final cutting stages. Resulting from a four-year research-and-development process, the digital solution for on-demand production was developed based on Industry 4.0 principles.

"We are very proud to receive this prestigious award at Texprocess, the biggest international event for all fashion players. Fashion On Demand by Lectra allows companies to produce personalized clothing at the same speed as ready-to-wear and avoid overstocking by producing in precise quantities,” states Holger Max-Lang, President, Northern & Eastern Europe, Middle East, Lectra.

Fashion On Demand by Lectra is available in the form of two packages, one dedicated to made to measure, with pattern adjustments, and the other to customization, with product characteristic alterations. This turnkey solution automates on-demand production right from order reception to production development stages and the cutting room. Companies can define their desired product personalization criteria for each item depending on the package, and launch production processes right from the get-go, without interfering with their standard workflows.

"This innovative cloud-based platform solution ensures efficient made-to-measure and customization production processes and facilitates nearshoring for companies that offer individualized products. This technology is up and running and can be used by the fashion industry on a plug-and-play basis," say the jury experts. “Since 2011, the Texprocess Innovation Award has been honoring remarkable achievements and new developments in the Texprocess product range under two categories: new technology and new process. The winners are selected based on criteria such as degree of innovation, choice of materials and environmental sustainability."

• Clean Technology. Smart Factory.

Remscheid – Oerlikon invites all visitors to this year's ITMA in Barcelona on a journey into the future of manmade fiber production. From 20 to 26 June 2019, the world market leader will show all its guests its vision of a sustainable and automated manmade fiber production in a virtual 4D showroom at its 1,000 m² stand in Hall 7, A101: "Clean Technology. Smart Factory." is the motto of the future. And this is only a stone's throw away from reality at the stand. Because today Oerlikon is presenting four world premieres for efficient machine and plant concepts in a new, innovative industrial design. Together with numerous other innovations, all this forms the new DNA of the Oerlikon Manmade Fibers segment.

The challenges for the manmade fiber industry are manifold and Oerlikon shows its customers solutions:

1. Choosing the right business model
Price pressure on fiber and yarn manufacturers is growing due to global market consolidation. Here it is important to position oneself correctly. Are you producing polyester, nylon or polypropylene for the niche market and skimming off good margins with innovative products and ingenious material properties, or are you looking for business success through economies of scale in the volume market such as the constantly growing apparel sector? Oerlikon has the right answers for both business models. And the most important thing: the market leader supplies all solutions from a single source. See for yourself at the world premieres of the machine and system concepts of WINGS FDY PA6, BCF S8 Tricolor and the revolutionary eAFK Evo texturing machine.

2. Finding alternatives for good personnel
Finding good operators in the manmade fiber industry is becoming increasingly difficult, even in emerging industrial nations such as China, India and Turkey. The solution is obvious. What, for example, the automotive industry achieved years ago with the 3rd Industrial Revolution is now also taking its course in the textile industry. And at the same time it is even shifting up a gear. In the next step, automation in combination with digitization will lead to new, sustainable production. Oerlikon will be showing how automation and digitization interact at ITMA. Self-learning machines and systems, artificial intelligence (AI), remote services and edge computing are just a few of the key words in the digital half of the new Oerlikon Manmade Fibers DNA.

3. Guarantee quality and traceability
The qualities of the fibers and yarns must meet the highest demands and their production must be traceable throughout the textile value chain. This no longer only plays an important role in the automotive industry, where safety is of paramount importance. Other branches of industry that use fibers, yarns and nonwovens also want to know where the raw materials they produce for consumer articles come from. Legal regulations are demanding this more and more frequently. Oerlikon offers optimal solutions with its DIN ISO certified manufacturing processes. More than half of the world's manmade fiber producers are convinced every day that the qualities produced on Oerlikon Barmag, Oerlikon Neumag and Oerlikon Nonwoven equipment are right – and all visitors to ITMA can do the same on site.

4. Efficient and sustainable production
In the future, the materials produced from manmade fibers must become part of a further improved global recycling economy. The recycling of polyester – with over 80% market share the most frequently used manmade fiber in the world – has not only been on the agenda since today. Oerlikon already has solutions at hand: from PET bottles to fibers and filaments, to textiles and carpets. ITMA is the next step. With the VacuFil® Oerlikon in cooperation with the subsidiary company BBEngineering presents the world premiere No. 4 – a recycling solution within a running polyester production with a waste-free approach.

Vision becomes reality
The Oerlikon Manmade Fibers segment thus demonstrates what the ITMA in Barcelona promises as the world's leading trade fair for textile machinery and plant construction: "Innovating the world of textiles – sourcing for a sustainable future". In Hall 7, A101, this is already reality.

A focus on customer service, aligned with the drive to constantly innovate, has long ensured that the member companies of TMAS – the Swedish texile machinery manufacturers’ association – stay well ahead of the curve.

“All of the Swedish textile machinery companies are doing really well in major markets such as Europe, China, India and the USA,” says TMAS Secretary General Therese Premler-Andersson. “They are now gathering forces to prepare for the most important show – ITMA 2019 in Barcelona in June. I expect to see new players and partnerships as we enter the industry 4.0 era for real. We are ready to display an even higher degree of the real time monitoring of processes, automation, flexible customisation, and the incorporation of robots into production lines.  Our customers expect a lot of in terms of knowledge and our ability to customise and offer turnkey solutions.”

The forward-looking attitude of the Swedish companies is perhaps best summed up by Reimar Westerlind, the owner, since 1961, of ACG Gruppen.
At the age of 90, Reimar still travels to his office every day to oversee the operations of the diverse companies operating under the ACG umbrella.
“Everything now is about automation and digitisation,” he says. “We have to be on that track or we will be lost – innovate or die.”

Robotics
One ACG Gruppen company moving rapidly forward with new innovations in this area is ACG Kinna, which at ITMA 2019 will be providing dramatic live demonstrations of its new robotic pillow filling system.
This has the ability to fill and finish some 3,840 pillows per eight-hour shift, which is a considerable improvement on what is currently possible with existing systems, resulting in significant savings in both labour and energy for busy home textile businesses.

At ITMA 2019, Eton will be demonstrating a complete material handling solution with advanced software providing real-time information covering every aspect of the process.
“Our systems are a natural fit with the major Industry 4.0 networked manufacturing plants that are now being constructed worldwide for sectors such as the garment and home textiles manufacturing and automotive industries,” says Eton’s Sales and Commercial Director Roger Ryrlén.

Sensors
Advanced senor developments are playing a large part in moving many areas of the textile industry forward too.
Eltex of Sweden, for example, is achieving considerable success with its yarn fault detection and tension monitoring systems across a range of sectors, including the tufting of carpets, the creeling of woven materials and even the production of woven reinforcements for the composites industry.

At successive ITMA shows, IRO AB has also consistently introduced new milestones in the field of yarn feeding technology for weaving machines, and ITMA 2019 will be no exception.
“Following significant investment in our R&D capabilities, we have been making great progress in further boosting the efficiency and performance of our expanding X3 range,” says IRO AB Managing Director and Chairman of TMAS Mikael Äremann. “I can’t remember a time since the 1980s when we had so many new innovations to unveil at an ITMA, and I’m greatly looking forward to the positive response to them we are anticipating in Barcelona this June.”

Resource savings
ITMA 2019 will meanwhile see the launch of TexCoat G4 – the next generation of Baldwin Technology’s non-contact precision application system for fabric finishing. The TexCoat G4 enables a continuously high-quality and productive textile finishing process with zero chemistry waste and minimised water and energy consumption.
The non-contact spray technology brings a range of advantages including single or double-sided application,  the elimination of Foulard bath contamination, low wet pick-up levels leading to the elimination of drying steps, zero chemistry waste in changeovers of chemistry, colour or fabric, and the possibility of batch reporting, visibility of pad loading, chemical usage etc.

Other TMAS companies exhibiting in Barcelona include Texo AB, whose wide-width weaving looms make the belts for machines on which half of the world’s paper is made, ES-Automatex, which specialises in bespoke automation concepts and Svegea, a company leading the field in a number colarette machines and cutting and slitting equipment.

“At the last ITMA in 2015 in Milan, there was much talk about Industry 4.0 technologies but certainly from the perspective of TMAS, ITMA 2019 will be the place for concrete solutions as to how data and the new tools we have available can be exploited to the full,” says Therese Premler-Andersson. “There is already much more networking between the companies, with software very much the enabler and common interfaces bringing ideas closer together. We are greatly looking forward to further exchanges of ideas when meeting with customers old and new in Barcelona.”